
Washer and dryer repair: how it works, what it costs and how to prepare
A plain guide to washer and dryer repair in North Vancouver: what a visit involves, what a washer repair usually costs, and how to get your laundry space ready.
Key takeaways
- Most washing machine repairs in Metro Vancouver run $180–$420 all-in, depending on the part.
- A good technician quotes on site before any work starts, and you can say no.
- Check power, hoses, the drain filter and the dryer vent before you book.
- Clear access to the machine, and note the model number, to save time on the visit.
- Leaks, burning smells and a machine that won't drain are worth a call sooner rather than later.
Washer and dryer repair is a technician diagnosing why a machine stopped working, telling you the cost, and replacing the part that failed. For a washing machine in Metro Vancouver, most repairs run $180–$420 all-in. The final number depends on the part. You should get that number on site, before any work begins.
This guide covers what a visit looks like, what you can check yourself, and how to get ready if you live in North Vancouver.
Washer and dryer repair: what a visit involves
The technician starts by asking what the machine is doing. Then they look at it. That usually means pulling the machine out, checking hoses, belts, pumps, switches and wiring, and running a cycle if it is safe to do so.
Once they know the cause, they give you a price. You decide whether to go ahead. If you say no, you pay only the service call fee. With us, you don't pay unless we fix it, though the service call fee applies.
If you go ahead, the repair is done during the visit when the part is on hand. Repairs are backed by our Fixed Right Promise. That is a 90-day parts warranty and a 7-day satisfaction guarantee on the workmanship.
Common problems we see
Washers and dryers fail in fairly predictable ways. These are the washer problems we are called about most.
- The machine won't drain or spin.
- Water leaks under the machine.
- The drum bangs or shakes on spin.
- The machine won't start or has no power.
- An error code shows on the display.
- The washer won't fill, or fills slowly.
Most of these trace back to a small number of parts, such as a pump, a hose, a valve, a lid switch or a control board. That is why the cost range is fairly narrow.
What it costs
For washing machines, plan on $180–$420 all-in. The low end is usually a simple part. The high end is usually a pump, motor or control part.
The quote is given on site, once the technician has seen the fault. We don't quote a repair price over the phone for a machine nobody has looked at, because the same symptom can have different causes.
When the quote is close to what a new machine would cost, that is worth thinking about. An older machine with more than one fault may not be worth fixing. A technician should tell you that plainly.
Quick checks before you book
A few minutes of checking can save you a visit. Some of these also give the technician useful information.
For a washer
- Make sure the machine is plugged in and the breaker has not tripped.
- Check that both water taps behind the machine are fully open.
- Look at the fill hoses for kinks.
- Clean the drain pump filter if your model has one, and keep a towel under it.
- Redistribute the load if the drum is banging. Heavy items like blankets can bunch up on one side.
For a dryer
- Clean the lint screen.
- Check that the vent hose behind the dryer is not crushed or loose.
- Check the outside vent flap opens when the dryer runs.
- Make sure the dryer is not overloaded.
If you smell burning, unplug the dryer and leave it off. That is not a problem to test further.
Getting ready for the visit in North Vancouver
Housing in North Vancouver varies a lot, and that affects the visit.
In Lower Lonsdale and other condo and walk-up buildings, laundry is often in a closet or a tight alcove. Pulling the machine out may take clear floor space. If your building has rules about elevators or visitor parking, let the technician know when you book.
In Upper Lonsdale, Lynn Valley, Edgemont and Canyon Heights, many homes are 1950s to 1970s houses and split-levels on sloped lots. Steep driveways can be slick in the fall rain, and in higher areas frost comes earlier. Tell us if parking is tight or the approach is steep.
Many homes here sit under tall cedar and fir. Shade and constant damp can leave outside dryer vents clogged with debris and moss. That is worth a look if your dryer has been slow.
Before the visit, it helps to do these things.
- Clear a path to the machine and a bit of space around it.
- Empty the drum.
- Write down the brand and model number, usually on a label inside the door or on the back.
- Note any error code and when the problem started.
- Put a towel down if the machine is leaking.
When to call a professional
Call a technician if the machine leaks, won't drain after you have cleaned the filter, shows an error code that returns, or has no power after you have checked the outlet and breaker. Call if a dryer smells of burning. Water and electrical faults can cause damage the longer they go. If you are unsure, an on-site quote costs you nothing beyond the service call fee, and you decide what happens next.
Need a hand from a real technician?
Our licensed pros repair washers and dryers across Metro Vancouver — same-day and next-day, with 90-day parts warranty + 7-day satisfaction guarantee.
Keep reading
What does agitator maintenance involve on a top-load washing machine?
Agitator maintenance is a short check you can do at home. Clean it, test that it sits tight, and listen for clicking. Here is what to look at and when a repair makes sense.
How much does it cost to fix a Samsung washer?
Most washer repairs in Metro Vancouver run $180 to $420 all-in, and a Samsung is no different. Here is what moves the price and how to get a fair quote.