
How much does it cost to fix a Samsung washer?
Most washer repairs in Metro Vancouver run $180 to $420 all-in, and a Samsung is no different. Here is what moves the price and how to get a fair quote.
Key takeaways
- Most washer repairs in Metro Vancouver run $180 to $420 all-in, depending on the part.
- The failed part sets the price more than the Samsung name on the front.
- Get the quote before any work starts, and ask what warranty comes with the repair.
- Simple checks like the filter, hoses and load size can save you a visit.
- If the quote gets close to the cost of a new machine, replacing may make more sense.
Most washing machine repairs in Metro Vancouver run $180 to $420 all-in, depending on the part. A Samsung washer falls inside that range like other brands. We don't keep a separate Samsung price list, because the part that failed matters more than the badge on the door.
This article explains what sits behind that range, what to check yourself, and how to judge a quote.
How much does it cost to fix a Samsung washer?
For most jobs, expect $180 to $420 all-in. All-in means the part and the labour together, not a low labour figure with the part added later.
The low end usually covers a smaller part that is easy to reach. The high end usually covers a larger part or one that takes more work to get at. Where your repair lands depends on what the technician finds.
What moves the price
A few things decide where you fall in the range.
- The part that failed. This is the biggest factor by far.
- How easy the part is to reach. Some parts sit behind panels or under the drum and take longer to replace.
- Whether there is more than one fault. A worn part sometimes causes a second problem, and both need fixing.
- The condition of the machine. An older washer may have other worn parts nearby.
Nobody can name an exact price over the phone without knowing the fault. Be wary of anyone who does.
Common Samsung washer problems and what they usually involve
These are the problems we see most often. The symptom tells you where the technician will start looking.
- Won't drain or spin. Often a blocked filter or drain path, or a part that moves the water out.
- Leaking water under the machine. Could be a loose hose, a worn seal or a failed part inside. Find the source before you guess.
- Loud banging or shaking on spin. Sometimes an unbalanced load or an uneven floor. Sometimes a worn part under the drum.
- Won't start or no power. Check the outlet and breaker first. If both are fine, the fault is inside the machine.
- Error code displayed. The code points toward the cause. Write it down before you reset the machine.
- Won't fill or fills slowly. Check that the taps are fully open and the hoses aren't kinked.
One symptom can have several causes, and that is why a quote after diagnosis is more reliable than a guess.
What to check before you book
A few minutes of checking can save you a service call. They can also give the technician better information.
- Confirm the machine has power and the breaker hasn't tripped.
- Open both water taps fully and look for kinked hoses.
- Clean the drain filter if your model has one, and keep a towel handy.
- Take out part of the load if the drum looks overfull.
- Note any error code and when the problem happens.
If the machine is leaking, turn off the water and unplug it. Then call.
Getting a fair quote
A fair quote comes before the work, not after. Our technician gives you an upfront quote on site before any work begins. If you don't want the repair at that price, you can say no.
Ask these questions of any repair company, including us.
- Is the quote all-in, with parts and labour?
- Is there a service call fee, and does it apply if the machine isn't fixed?
- What warranty covers the parts and the work?
Our terms are simple. You don't pay unless we fix it, though the service call fee applies. Every repair carries a 90-day parts warranty and a 7-day satisfaction guarantee on the workmanship.
Housing in New Westminster and what it means for a washer repair
New Westminster has some of the oldest housing in the region. In Queen's Park and Sapperton, many Victorian and Edwardian homes sit on steep, narrow lots. A washer in an older house may be tucked into a tight spot, so tell us where it sits when you book.
In Uptown and Downtown, most people live in low-rise and high-rise condos. A leak in a condo can reach the unit below, so shut off the water at once if you see one. Queensborough has newer houses and townhouses on flat land, and access is usually simpler there.
Repair or replace
A repair makes sense when the quote is clearly lower than the cost of a new machine and the washer has otherwise worked well. If the quote comes close to the price of a new one, replacing is worth a serious look. The same goes for a machine with several faults at once.
Ask the technician for an honest view. A good one will tell you when a repair isn't worth it.
When to call a professional
Call a professional if the washer leaks, won't drain after you've cleaned the filter, shakes hard on spin, or shows an error code that keeps coming back. Call too if it has no power and the outlet and breaker are fine. Electrical faults and internal leaks are not good jobs to try yourself. If you'd like a price before you decide, we're open 7 days, 24 hours, and offer same-day service when available.
Need a hand from a real technician?
Our licensed pros repair washers and dryers across Metro Vancouver — same-day and next-day, with 90-day parts warranty + 7-day satisfaction guarantee.
Keep reading
What does agitator maintenance involve on a top-load washing machine?
Agitator maintenance is a short check you can do at home. Clean it, test that it sits tight, and listen for clicking. Here is what to look at and when a repair makes sense.
How do sensor drying and timed drying affect results on a washer dryer?
Sensor drying stops when clothes are dry. Timed drying runs for the minutes you set. Here is how each affects dryness, fabric wear and energy use, and what to do when results are off.