Skip to main content
Vancouver Washing Machine RepairWasher & Dryer Specialists
Frigidaire washing machine in a Metro Vancouver laundry room
Frigidaire Specialist

Frigidaire Washing Machine Repair in Metro Vancouver

Frigidaire and its sister brand Electrolux share most washer parts and platforms, and we service every Frigidaire washer common in Metro Vancouver — Affinity front-loaders, Gallery and Professional lines, and the FFTW top-loaders. Drain pumps and door switches are the most frequent repair calls.

Key takeaways

  • Factory-trained on Frigidaire Affinity, Gallery, Professional, and FFTW top-load washers.
  • Frigidaire E-codes (E10, E13, E20, E21, E41) diagnosed on the first visit.
  • Genuine Frigidaire parts: drain pumps, door switches, boots, shocks, control boards.
  • Same-day service across all 14 Metro Vancouver cities, 7 days a week.
  • Backed by our Fixed Right Promise: 90-day parts warranty + 7-day satisfaction guarantee.

About Frigidaire washers

Frigidaire is owned by Electrolux and shares washer platforms with the Electrolux brand. The Affinity front-load is the most-sold Frigidaire washer in Metro Vancouver; Gallery and Professional are the mid- and upper-tier feature variants.

Frigidaire models we service

  • Affinity ATF / FAFW front-load
  • Gallery FGHW / FFHW front-load
  • Professional FPFW / FLCE front-load
  • FFTW top-load (FFTW4120 / FFTW1814)
  • Stacked Frigidaire FLCE laundry center

Parts on the truck

Genuine Frigidaire drain pumps, door switches, boots, inlet valves, and control boards stocked or available next-day.

  • Upfront flat-rate quote on-site before any work begins.
  • Don't pay unless we fix it — service call fee applies.
  • 90-day parts warranty + 7-day satisfaction guarantee.
  • Open 7 days, 24 hours — same-day service when available.

Common Frigidaire washer issues we fix

The failure patterns our Metro Vancouver technicians diagnose most often on Frigidaire washers, and the typical fix.

SymptomTypical fix
Affinity won't drain — E20 / E21Clean filter; replace drain pump
Door won't lock — E41 / E42Replace door switch assembly
Won't fill — E10Clean screens; replace water inlet valve
Leak detected — E13Inspect; replace boot, seal, or hose as needed
Loud bearing noise on spin (Affinity)Quote on case-by-case basis (major job)
FFTW top-loader won't spinReplace lid switch or belt

Frigidaire washer error codes

Quick reference for the Frigidaire fault codes we see most in Metro Vancouver homes. Save the code your machine is showing — it lets our technician bring the exact replacement part on the first visit.

CodeWhat it means
E10Water fill error
E13Water leak detected
E20 / E21Drain error
E23Drain pump relay
E30Overflow
E31Pressure sensor
E41 / E42 / E43Door switch / interlock
E5A / E5BControl board fault
E5ECommunication error
E70Selector switch

Don't see your code? Call (437) 218-0111 and we'll diagnose it on the phone.

Frigidaire washer repair across Metro Vancouver

Local technicians dispatched to every Metro Vancouver city with no travel charge in our standard service area.

Frigidaire washer repair FAQs

What does E20 mean on a Frigidaire Affinity washer?
E20 (and E21) is the Frigidaire drain error. The drain pump filter is almost always clogged — there's a small access door at the front-bottom of the washer. Clear lint, coins, and hair. If it still fails, the drain pump itself needs replacing — a 30-minute job with the genuine Frigidaire part.
How much does Frigidaire washing machine repair cost in Vancouver?
Most Frigidaire washer repairs in Metro Vancouver run $180–$420 all-in. Drain pumps and door switches are at the lower end; control boards and bearing replacement at the upper end. Don't pay unless we fix it — service call fee applies.
Are Frigidaire and Electrolux washers the same?
They share most platforms and many parts — Electrolux owns Frigidaire and the same engineering applies. The Electrolux versions get higher-end finishes and a few extra features, but service procedures and most replacement parts are identical.
My Frigidaire washer shows E41 — can I fix it myself?
E41 is a door interlock fault. It's a moderate DIY repair (one screw + one connector on most models) but if you're not comfortable disassembling the door surround we'll handle it on a same-day visit.
Do you service older Frigidaire Affinity washers?
Yes. The original Affinity line had a known bearing wear issue around 8–10 years — we still see lots of them and parts are still available for the common failure points.

Other washing machine brands we service

Book your repair

Tell us what's going on and we'll get back to you fast — usually within the hour during business hours — to confirm your appointment.

  • Open 7 days, 24 hours — same-day when available
  • Upfront quote — don't pay unless we fix it
  • Fixed Right Promise: 90-day parts warranty + 7-day satisfaction guarantee

Prefer to talk now?

(437) 218-0111

Open 7 days, 24 hours

What needs repair? *

A quick description helps us bring the right parts.

No obligation. We'll only use your details to contact you about this repair.

FAQ

Questions, answered

We're open 7 days a week, 24 hours a day, and same-day service is often available when you call early in the day. We aim to call you back within 10 minutes and confirm your arrival window by text.

Don't live with a broken washer or dryer

Book online in under a minute, or call now to speak with a real person. Same-day service across Metro Vancouver.